Quick- Fit-Head PRO

article no.: 195

Quick- Fit-Head PRO

article no.: 195

The Quick- Fit-Head PRO is an indispensable tool for anyone who is committed to perfect cleanliness and order. Thanks to its sturdy construction and high-quality materials, the Industrial Handle guarantees reliability and precision when cleaning even the most demanding surfaces.

The innovative linkage mechanism with an aluminum telescopic rod ensures even distribution of the cleaning force, which allows you to effectively remove dirt and dust from any surface. In addition, the quick-change industrial floor pads allow the tool to adapt to different types of floors, eliminating the need for multiple handles.

The Quick- Fit-Head PRO is used together with a telescopic rod (310- 1.65m or 311-2.20m) and one of the four industrial floor cushions available in our offer (product code: 191, 192, 193, 194).

Easy and quick connection with telescopic rod
Stability and precision during cleaning
Adaptable to different types of flooring
Save time and energy during daily cleaning

Floor set

The floor set consists of a handle and a telescopic rod. On the handle there is a clip with a lock and a clip with a fuse, in which the telescopic rod is embedded.

The Euro-fuse (1) should be grasped at the sides and pulled out of the clip (2), insert the telescopic rod (6) into it so that the holes in the rod coincide with the holes in the clip.
Insert the fuse (1) into the holes, after a slight rotation of the rod the fuse will pop into place
Tighten the thread on the striker (2).
Use the thread on the telescopic rod (8) to adjust its length.
By pressing the clip with lock (3) loosen the handle arm (4) , put the floor cushion and align the handle arm, which will fix the clip with lock.
The floor set is ready for use.
If you need to change the tilt of the handle, put the toggle cap (9) between the handle (5) and the telescopic rod (6).

Window care express

Use the set, consisting of the Window Care Express, conus, toggle and telescopic rod, to clean high windows.

1. Press the tabs located on the toggle cap (9), and then slide it into the hole in the telescopic rod (6).
2. Press the tabs on the conus (7) and slide it into the hole of the toggle cap (on the opposite side to the telescopic rod).
3. Put the Window Express (10) on the conus (7).
4. Use the thread on the telescopic rod (8) to adjust its length
5. With the joint (9) change the inclination of the Window Care Express as needed.

All of our products have a product card available with a description of all properties. We encourage you to read the card of this product, which you will find at the link below.

Download the product card